Gas pipe 25MTR

Description

Gas pipe 25MTR

gas pipe 25 m” typically means a roll of pipe (or hose) designed for gas supply over a run of about 25 metres.

• It could be rigid/ semi-rigid pipe (e.g., polyethylene / MDPE – medium density polyethylene) used for distributing natural gas or LPG underground / semi-buried.

• Or it could be a flexible hose line (e.g., 8 mm hose 25 m long) used for workshop gas equipment / LPG cylinders.

• For example, a yellow 25 mm diameter MDPE gas pipe coil is used for underground gas mains, with a length of e.g. 50 m in one listing.

So when you say “Gas pipe 25 MTR” you likely mean a roll of pipe/hose 25 metres long for gas application.

🧩 Key Features

Here are the features you want to look for:

1. Material & construction

   • For buried/slab pipe: MDPE (medium density polyethylene) is common. Eg, yellow MDPE for gas, with corrosion resistance and UV resistanc

   • For flexible hose: synthetic rubber or specially rated rubber/thermoplastic hose adhering to standards (e.g., ISO 3821 for fuel-gas hoses) for LPG/propane etc

2. Length & diameter / size

   • Length: your target is 25 metres. Make sure the roll length is exactly 25 m (or whatever specific).

   • Diameter: depends on load/flow. For MDPE pipe example: 25 mm diameter is used for significant supply lines.

   • Hose example: 8 mm inner diameter for workshop gas hose 25 m length.

3. Pressure / Rating & Certification

   • The MDPE pipe example: max working pressure ~5.5 bar at 0-20 °C.Check it is approved/certified for gas: e.g., compliance with GIS/PL2-2:2006 or EN standards.

   • For hoses: the working pressure rating (e.g., 17.5 bar in the workshop hose example) and compliance with specs like ISO 3821.

4. Colour & Identification

   • For buried gas pipe: yellow exterior is common so that it is easily identifiable as gas.Markings may include gas, manufacturer, standards.

5. Durability & installation ease

   • The MDPE pipe: mentions non-corrosive, good resistance to solvents, UV degradation, soil conditions.

   • The hose: flexibility, ability to reach long runs, withstand abrasion, minimal pressure drop.

6. Suitability for application

   • Determine whether this is for underground fixed installation (like a supply line), or above‐ground flexible hose for equipment. The specs differ.

   • Ensure the diameter and length are adequate for the gas flow you need (heating appliances, BBQ, large stove, etc).

   • Ensure the material and